Hoppa till huvudinnehåll

Hur dubbelklickar jag på en cell för att öppna ett angivet kalkylblad i Excel?

Vill du snabbt navigera till ett angivet kalkylblad i en Excel-arbetsbok? Den här artikeln ger en VBA-metod för att öppna ett angivet kalkylblad genom att dubbelklicka på en viss cell i Excel.

Dubbelklicka på en cell för att öppna ett angivet kalkylblad med VBA-kod

Dubbelklicka på en cell för att öppna ett angivet kalkylblad med VBA-kod

Gör så här för att öppna ett angivet kalkylblad genom att dubbelklicka på en cell i Excel.

1. Högerklicka på arkfliken som innehåller cellen du vill öppna kalkylbladet genom att klicka på den. Och klicka sedan på Visa kod från snabbmenyn. Se skärmdump:

2. I öppningen Microsoft Visual Basic för applikationer kopiera följande VBA-kod till kodfönstret.

VBA-kod: dubbelklicka på cellen för att öppna ett angivet kalkylblad i Excel

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'Updated by Extendoffice 20180822
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A1;Sheet2", "A12;Sheet3", "A4;Sheet4", "A100;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub

Anmärkningar: I VBA-koden, "A1; Blad2""A12; Blad3""A4; Blad4""A100; Blad5" betyder att dubbelklicka på cell A1 kommer att öppna Blad2, dubbelklicka på A2 öppnar Blad3..., vänligen ändra dem baserat på dina behov.

3. tryck på andra + Q knapparna tillsammans för att stänga Microsoft Visual Basic för applikationer fönster.

Från och med nu, när du dubbelklickar på cell A1 i det aktuella kalkylbladet, kommer det angivna kalkylbladet att aktiveras omedelbart.

Relaterade artiklar:

Bästa kontorsproduktivitetsverktyg

🤖 Kutools AI Aide: Revolutionera dataanalys baserat på: Intelligent utförande   |  Generera kod  |  Skapa anpassade formler  |  Analysera data och generera diagram  |  Anropa Kutools funktioner.
Populära funktioner: Hitta, markera eller identifiera dubbletter   |  Ta bort tomma rader   |  Kombinera kolumner eller celler utan att förlora data   |   Rund utan formel ...
Superuppslag: Flera kriterier VLookup  |   VLookup med flera värden  |   VSök över flera ark   |   Fuzzy Lookup ....
Avancerad rullgardinslista: Skapa snabbt en rullgardinslista   |  Beroende rullgardinslista   |  Flervals-rullgardinslista ....
Kolumnhanterare: Lägg till ett specifikt antal kolumner  |  Flytta kolumner  |  Växla synlighetsstatus för dolda kolumner  |  Jämför intervall och kolumner ...
Utvalda funktioner: Rutnätsfokus   |  Designvy   |   Stor formelbar   |  Arbetsbok & Bladhanterare   |  Resursbibliotek (Automatisk text)   |  Datumväljare   |  Kombinera arbetsblad   |  Kryptera/Dekryptera celler   |  Skicka e-postmeddelanden efter lista   |  Superfilter   |   Specialfilter (filtrera fet/kursiv/genomstruken...) ...
Topp 15 verktygssatser:  12 text verktyg (lägga till text, Ta bort tecken, ...)   |   50+ Diagram Typer (Gantt Chart, ...)   |   40+ Praktiskt Formler (Beräkna ålder baserat på födelsedag, ...)   |   19 Införande verktyg (Infoga QR-kod, Infoga bild från sökväg, ...)   |   12 Konvertering verktyg (Siffror till ord, Valutaväxling, ...)   |   7 Slå ihop och dela verktyg (Avancerade kombinera rader, Dela celler, ...)   |   ... och mer

Uppgradera dina Excel-färdigheter med Kutools för Excel och upplev effektivitet som aldrig förr. Kutools för Excel erbjuder över 300 avancerade funktioner för att öka produktiviteten och spara tid.  Klicka här för att få den funktion du behöver mest...

Beskrivning

Fliken Office ger ett flikgränssnitt till Office och gör ditt arbete mycket enklare

  • Aktivera flikredigering och läsning i Word, Excel, PowerPoint, Publisher, Access, Visio och Project.
  • Öppna och skapa flera dokument i nya flikar i samma fönster, snarare än i nya fönster.
  • Ökar din produktivitet med 50 % och minskar hundratals musklick för dig varje dag!
Comments (14)
No ratings yet. Be the first to rate!
Will
Will
This comment was minimized by the moderator on the site
Can't get the code to open the other worksheet
Reply
0
0
crystal
crystal     Will
This comment was minimized by the moderator on the site
Hi Will,Is there any prompts while using the code?
Reply
Report
0
0
Wilbertmosley
Wilbertmosley
This comment was minimized by the moderator on the site
Can't get code to open the other sheet, can some help
Reply
0
0
vera
vera
This comment was minimized by the moderator on the site
hi!
It cannot accept the code for more than 59 sheets.
What code do i need to use to insert more sheets.
When it change the line the code doesnt work.
Help!
Reply
0
0
Carl
Carl
This comment was minimized by the moderator on the site
Hi Crystal

I have copied the code and edited according to the name of the worksheets. The code is running but I still cannot open the sheets, what have I done wrong?

Sub OpenbyDoubleclicking(ByVal Target As Range, Cancel As Boolean)

Dim xArray, xAvlaue As Variant '
Dim xFSum As Long
Dim xStr, xStrRg, xStrSheetname As String
xRgArray = Array("A3;FTIR", "A4;Viscometer")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetname = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then _
Sheets(xStrSheetname).Active
End If
Next
End Sub


Many thanks
Reply
0
0
crystal
crystal     Carl
This comment was minimized by the moderator on the site
Hi Carl,
In your code, please replace the first line with "Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)".
Thank you for your comment. The entire code should be as follows.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A3;FTIR", "A4;Viscometer")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
Reply
Report
0
0
neil04
neil04
This comment was minimized by the moderator on the site
Hi how can i extend my array? it stucks already and i cannot add more of this because it limits to col 1024 only for that line. pls help

xRgArray = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5")
Reply
Report
0
0
crystal
crystal     neil04
This comment was minimized by the moderator on the site
Hi Neil,
The code works well in my case even extended my array to Array = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5", "A6;Sheet6").
Can you tell me your Excel version?
Reply
Report
0
0
James
James
This comment was minimized by the moderator on the site
After you get to the desired sheet. Is there a way to copy information from a cell in that sheet and automatically go back to the cell I double clicked on originally in the first sheet?
Reply
0
0
crystal
crystal     James
This comment was minimized by the moderator on the site
Hi James
You need to manually click the original worksheet tab to back to it. Sorry can't take this into consideration.
Reply
Report
0
0
Guest
Guest
This comment was minimized by the moderator on the site
Is there a way to do multiple codes for one tab? such as clicking on another cell to jump into another worksheet.

How would that code look like?
Reply
0
0
crystal
crystal     Guest
This comment was minimized by the moderator on the site
Good day,

The below VBA code can help you to solve the problem. Thanks for your comment.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xStrRg = ""
xStrRg = Left(xStr, 2)
xStrSheetName = ""
xStrSheetName = Right(xStr, Len(xStr) - 3)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
Reply
Report
0
0
SG
SG     crystal
This comment was minimized by the moderator on the site
Hi, In the line that states xStrRg = Left(xStr, 2), this picks up the cell if its a single number cell i.e. A1, A2, A3. but not if its A11, or A111. how do i write the code to allow me to use cells A1, A11, and A111?

Hope this makes sense, i'm not particularly technical!!
Reply
0
0
crystal
crystal     SG
This comment was minimized by the moderator on the site
Good Day,
The code has been optimized again. Please have a try and thanks for your comment.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A1;Sheet2", "A12;Sheet3", "A4;Sheet4", "A100;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
Reply
Report
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations