Hoppa till huvudinnehåll

Läs / visa enkelt ett stort antal rader och kolumner i Excel

Kutools för Excel

Ökar Excel med 300+
Kraftfulla funktioner

Om du arbetar med att kalkylbladet innehåller enorma data med hundratals rader och kolumner, kan du lätt få pussel när du kontrollerar och hoppar över data från den ena till den andra, vilket kommer att slösa tid. För att lösa detta problem framhäver Grid Focus-verktyget i Kutools för Excel den övergripande raden och kolumnen för att göra den aktiva cellen eller intervallet enastående enligt skärmbilden nedan. demo

skottläsningslayout 2


Aktivera verktyget Grid Focus

Klicka Kutools > Rutnätsfokus för att aktivera det här verktyget, medan Grid Focus är aktiverat, är fliken markerad.
skottläsningslayout 2


Grid Focus inställningar

Om du vill ändra inställningarna såsom former, stilar, färger eller transparens kan du gå till Rutnätsfokusinställnings dialog för att ändra.

Klicka Kutools och klicka för att klicka på pilen bredvid Rutnätsfokus för att expandera rullgardinsmenyn och klicka sedan på Inställningar för rutnätsfokus.
skottläsningslayout 2

I Inställningar för rutnätsfokus kan du ändra former, stilar, färger och transparens efter behov, samtidigt som du kan förhandsgranska ändringen i Förhandsvisning innan du tillämpar ändringarna.
skottläsningslayout 2

Om oss Markera området för aktiv cell och Markera området för redigering av cell alternativ.

Kryssa Markera området för aktiv cell alternativet markeras den aktiva cellen eller området.

skottläsningslayout 2

Avmarkera Markera området för aktiv cell alternativ, men kryssa i Markera området för redigering av cell alternativet markeras inte den aktiva cellen eller intervallet, men det överfyllda området är markerat.

skottläsningslayout 2

Avmarkera båda Markera området för aktiv cell och Markera området för redigering av cell alternativ, både den aktiva cellen eller det aktiva området och det överfyllda området markeras inte.

skottläsningslayout 2

Aktivera Grid Focus: kryssa för det här alternativet efter inställningar och klicka OK, kommer Grid Focus att automatiskt aktiveras.

Standardinställningar: klicka på den här knappen, inställningarna för Grid Focus har återställts till standardinställningarna för Kutools.


Anmärkningar:

1. Du kan avbryta det här verktyget genom att klicka på Rutnätsfokus kommandot ändras fliken till ljusgrå.

2. Om du öppnar flera Excel-filer, detta Rutnätsfokus funktionen tillämpas på dem alla.

3. Detta Rutnätsfokus aktiveras inte automatiskt när du startar arbetsboken nästa gång.

Grid Focus Demo


Kutools för Excel: Över 300 praktiska verktyg till hands! Börja din 30-dagars gratis provperiod utan funktionsbegränsningar idag. Ladda ner nu!

    Produktivitetsverktyg rekommenderas
    Följande verktyg kan i hög grad spara tid och pengar, vilket är rätt för dig?
    Fliken Office: Använda praktiska flikar i ditt Office, som sättet för Chrome, Firefox och New Internet Explorer.
    Kutools för Excel: Mer än 300 avancerade funktioner för Excel 2021, 2019, 2016, 2013, 2010, 2007 och Office 365.

    Kutools för Excel

    Funktionaliteten som beskrivs ovan är bara en av 300 kraftfulla funktioner i Kutools för Excel.

    Designad för Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 och Office 365. Gratis nedladdning och användning i 30 dagar.

    Skärmdump av Kutools för Excel

    btn läs mer      nedladdning av btn     btn-köp

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations